DDR5 RAM Memory Slot Tester Card with LED Lights Portable for PC Motherboard RAM Memory Maintenance for Indication Open and Short Circuit(Red)
Description
Specification:
Item Type: RAM Memory Slot Tester
Material: PCB
Battery: Coin cell CR2032 x1 (shipped without battery)
Adaptation: DDR5 tester all support for INTEL, for AMD all DDR5 interface motherboard, with light emitting diodes to indicate the data line, address line open and short circuit
Use: Used to repair the motherboard failure such as no boot, no display, no memory reading, is a necessary tool to repair the computer motherboard.
Package List:
1 x RAM Memory Slot Tester
Note:
1. DDR5 tester in testing the motherboard, the motherboard must be plugged into the CPU, the test light will be on, because the memory part of the signal is connected to the CPU.
2. After the tester battery is used several times, the tester brightness becomes dark, then the battery voltage is too low, you need to replace the battery in time.
3. The tester’s various , due to differences in the design of the motherboard and chipset of each motherboard vendor, some of the may be displayed differently, please use the same motherboard to judge the maintenance staff.
4 Desktop DDR5 currently on the market there are two interface types, when one side can not be inserted into the memory slot test, please switch to the other side for testing.
5. Memory exists on the motherboard according to the amount varies, the signal name on the memory pin will change, but all the pin number arrangement will not change, so DDR5 with light tester will change the name of the light to pin number, can facilitate customers to clearly know the signal abnormal pin.
6. This tester only supports memory hooked up to the CPU. It does not support memory hooked up to for Millbrook or for NB.
There are no question found.
Rating & Review
There are no reviews yet.